Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING VALVE AND TRANSMITTER: REMOVAL

REMOVAL

1. REMOVE FRONT WHEEL
2. REMOVE REAR WHEEL
3. REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER
(a) Remove the valve cap and core, and release air from the tire.
(b) After ensuring that a sufficient amount of air is released, remove the nut and washer that are used to fix the tire pressure warning valve and transmitter in place, and then drop the tire pressure warning valve and transmitter inside the tire.





(c) After dropping the tire pressure warning valve and transmitter into the tire, disengage the bead using the shoe of a tire remover.

NOTE: Be careful as the tire pressure warning valve and transmitter may become damaged due to interference between the sensor and tire bead.

(d) Remove the bead on the upper side.
(e) Take out the tire pressure warning valve and transmitter from the tire and remove the bead on the lower side.

HINT: Remove the grommet, washer and nut as a set even if the grommet is not damaged.