Removal

SUSPENSION: FRONT STABILIZER BAR: REMOVAL

REMOVAL

1. REMOVE FRONT DISC WHEEL
2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH





(a) Remove the 2 nuts and the front stabilizer link assembly LH.

HINT: If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.

3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT: Remove the RH side by following the same procedures withe the LH side.

4. REMOVE FRONT STABILIZER BRACKET NO. 2 LH





(a) Remove the 2 bolts and front stabilizer bracket No. 2 LH.
5. REMOVE FRONT STABILIZER BRACKET NO. 1 RH

HINT: Remove the RH side by following the same procedures withe the LH side.

6. REMOVE FRONT STABILIZER BAR BUSH NO. 1
(a) Remove the 2 front stabilizer bar bush No. 1.
7. REMOVE STABILIZER BAR FRONT