Reassembly

EXTERIOR: FRONT BUMPER: REASSEMBLY

REASSEMBLY

1. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY





(a) Install the front bumper reinforcement sub-assembly with the 4 nuts.
Torque: 58 Nm (591 kgf-cm, 43 ft-lbf)
2. INSTALL FRONT BUMPER ENERGY ABSORBER
3. INSTALL FRONT BUMPER SIDE SUPPORT LH





(a) Install the front bumper side support LH with the 2 screws.
Torque: 3.0 Nm (31 kgf-cm, 27 in-lbf)
4. INSTALL FRONT BUMPER SIDE SUPPORT RH

HINT: Use the same procedures for the RH side and LH side.

5. INSTALL FRONT BUMPER SIDE MOUNTING BRACKET LH





(a) Install the front bumper side mounting bracket LH with the bolt and 2 nuts.
Bolt - Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
Nut - Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
6. INSTALL FRONT BUMPER SIDE MOUNTING BRACKET RH

HINT: Use the same procedures for the RH side and LH side.

7. INSTALL FRONT BUMPER REINFORCEMENT PLATE





(a) Install the front bumper reinforcement plate with the 3 bolts.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
8. INSTALL FRONT BUMPER COVER





(a) Install the radiator grille lower with the 13 claws.
(b) Install the 2 bolts.
Torque: 7.5 Nm (77 kgf-cm, 66 in-lbf)
9. INSTALL RADIATOR GRILLE LOWER
10. INSTALL FOG LIGHT ASSEMBLY LH Installation
11. INSTALL FOG LIGHT ASSEMBLY RH

HINT: Use the same procedures for the RH side and LH side.

12. INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light) Installation
13. INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)

HINT: Use the same procedures for the RH side and LH side.

14. INSTALL FRONT BUMPER HOLE COVER LH (w/ Fog Light)
15. INSTALL FRONT BUMPER HOLE COVER RH (w/ Fog Light)