Reassembly

SEAT: REAR NO. 1 SEAT ASSEMBLY: REASSEMBLY

REASSEMBLY

1. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER LH





(a) Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

NOTICE:
- Be careful not to damage the cover.
- When installing hog rings, take care to prevent wrinkles as much as possible.

(b) Using hog ring pliers, install the seat cushion cover with pad to the seat cushion frame with new hog rings.

NOTICE:
- Be careful not to damage the cover.
- When installing hog rings, take care to prevent wrinkles as much as possible.

(c) Attach the cushion cover hook.
2. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER RH

HINT: Use the same procedures described for the LH side.

3. INSTALL REAR SEAT CUSHION UNDER COVER RH
(a) Install the under cover with the 7 clips.
4. INSTALL REAR SEAT CUSHION UNDER COVER LH
(a) Install the under cover with the 5 clips.
5. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH
(a) Install the 2 hinges with the 2 bolts.
Torque: 18 Nm (184 kgf-cm, 13 ft-lbf)
6. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH

HINT: Use the same procedures described for the LH side.

7. INSTALL REAR SEAT BELT OUTER CENTER
(a) Install the belt with the nut.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
8. INSTALL REAR SEATBACK LOCK ASSEMBLY LH
(a) Install the 2 bolts and seatback lock.
(b) Install the seatback lock release button.
9. INSTALL REAR SEATBACK LOCK ASSEMBLY RH

HINT: Use the same procedures described for the LH side.

10. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH





(a) Using hog ring pliers, install the seatback cover to the seatback pad RH with new hog rings.

NOTICE:
- Be careful not to damage the cover.
- When installing hog rings, take care to prevent wrinkles as much as possible.

(b) Using hog ring pliers, install the seatback cover with pad to the seatback frame with new hog rings.

NOTICE:
- Be careful not to damage the cover.
- When installing hog rings, take care to prevent wrinkles as much as possible.

11. INSTALL SEPARATE TYPE REAR SEATBACK COVER RH

HINT: Use the same procedures described for the LH side.

12. INSTALL REAR SEAT BACK LOCK COVER RH
(a) Install the screw and seatback lock cover.
13. INSTALL REAR SEAT BACK LOCK COVER LH
(a) Install the screw and seatback lock cover.
14. INSTALL REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY





(a) Install the cup holder.





(b) Install the 3 screws and return the center armrest cover to its original position.





(c) Close the fastener.
15. INSTALL REAR SEAT ARMREST ASSEMBLY CENTER
(a) Install the armrest with the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Install the armrest cover with the screw.
16. INSTALL REAR SEAT LOCK STRIKER SUB-ASSEMBLY
(a) Install the 2 strikers with the 6 bolts.
Torque: 18 Nm (184 kgf-cm, 13 ft-lbf)
17. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY CENTER
(a) Install the hinge with the 2 bolts.
Torque: 18 Nm (184 kgf-cm, 13 ft-lbf)
18. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH
(a) Install the hinge with the bolt.
Torque: 18 Nm (184 kgf-cm, 13 ft-lbf)
19. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY RH

HINT: Use the same procedures described for the LH side.