Reassembly

2UZ-FE LUBRICATION: OIL PUMP: REASSEMBLY

REASSEMBLY

1. INSTALL OIL PUMP ROTOR SET





(a) Place the drive and driven rotors into the pump body with the marks facing the pump body cover side.





(b) Install the oil pump body cover with the 10 screws.
Torque: 10 Nm (105 kgf-cm, 7 ft-lbf)
2. INSTALL OIL PUMP RELIEF VALVE





(a) Insert the relief valve and compression spring into the oil pump body hole.
(b) Install the plug.
Torque: 49 Nm (500 kgf-cm, 36 ft-lbf)