Removal

AIR CONDITIONING: COMPRESSOR AND MAGNETIC CLUTCH (for 2UZ-FE): REMOVAL

REMOVAL

1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM Service and Repair
2. REMOVE FAN AND GENERATOR V BELT
3. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY





(a) Remove the nut and disconnect the discharge hose sub-assembly from the compressor and magnetic clutch.
(b) Remove the O-ring from the discharge hose sub-assembly.

NOTE: Seal the opening of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.

4. DISCONNECT SUCTION HOSE SUB-ASSEMBLY





(a) Remove the nut and disconnect the cooler refrigerant suction hose sub-assembly from the compressor and magnetic clutch.
(b) Remove the O-ring from the cooler refrigerant suction hose sub-assembly.

NOTE: Seal the opening of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.

5. REMOVE COMPRESSOR AND MAGNETIC CLUTCH





(a) Disconnect the connector.
(b) Remove the nut.
(c) Remove the 3 bolts, stay, compressor and magnetic clutch.