Reassembly

AXLE: FRONT AXLE HUB (for 4WD): REASSEMBLY

REASSEMBLY

1. INSTALL FRONT AXLE HUB SPACER





(a) Using a brass bar and a hammer, install a new front axle hub spacer.

NOTE: Do not damage the spacer.

2. INSTALL FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY





(a) Using SST and a press, install a new bearing to the front axle hub.
SST: 09649-17010
3. INSTALL FRONT AXLE HUB





(a) Apply MP grease to a new O-ring.
(b) Install the new O-ring to the axle hub.
(c) Install the dust cover and axle hub to the steering knuckle with the 4 bolts.
Torque: 80 Nm (816 kgf-cm, 59 ft-lbf)
4. INSTALL STEERING KNUCKLE OIL SEAL





(a) Using SST and a press, install a new steering knuckle oil seal.
SST: 09527-17011
SST: 09950-70010
09951-07100
SST: 09951-01000