Removal

2UZ-FE ENGINE CONTROL SYSTEM: ECM: REMOVAL

REMOVAL

1. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 2 Removal
2. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY Removal
3. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO.2 Removal
4. REMOVE ECM





(a) Disconnect the 5 ECM connector.
(b) Remove the 3 nuts and ECM.
(c) Remove the 2 screws and ECM bracket No. 1 from the ECM.
(d) Remove the 2 screws and ECM bracket No. 2 from the ECM.