On-Vehicle Inspection

2UZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
(a) Warm up the engine.
(b) Turn the ignition switch OFF.
(c) Connect Techstream to the DLC3.
(d) Turn the ignition switch to ON.
(e) Turn the tester ON.
(f) Enter the following menus:
Select: Powertrain / Engine and ECT / Active Test / Control the VVT System (Bank 1 or Bank 2).
(g) Check the engine speed when the OCV is operated by the Techstream.
Idle speed:
650 to 750 rpm
OK: