Installation

SUSPENSION CONTROL: SUSPENSION CONTROL ECU: INSTALLATION

INSTALLATION

1. INSTALL SUSPENSION CONTROL ECU
(a) Install the suspension control ECU with the 2 bolts.
Torque: 7.8 Nm (80 kgf-cm, 69 in-lbf)
(b) Connect the 3 suspension control ECU connectors.
2. INSTALL INSTRUMENT PANEL LOWER LH
3. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER
4. INSTALL INSTRUMENT PANEL FINISH PLATE
5. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 1
6. INSTALL COWL SIDE TRIM BOARD LH
7. INSTALL FRONT DOOR SCUFF PLATE LH