Removal

2UZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT POSITION SENSOR: REMOVAL

REMOVAL

1. DRAIN ENGINE COOLANT Service and Repair
2. REMOVE THROTTLE BODY COVER SUB-ASSEMBLY Removal
3. REMOVE FAN AND GENERATOR V BELT Removal
4. REMOVE OIL COOLER PIPE Removal
5. REMOVE TIMING BELT COVER SUB-ASSEMBLY NO. 3 LH Removal
6. REMOVE CAMSHAFT POSITION SENSOR





(a) Disconnect the camshaft position sensor connector.
(b) Remove the bolt, stud bolt and camshaft position sensor.