Audio and Visual System

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 44-46: Disc Crack

DTC 44-46 - Disc Crack

DESCRIPTION





INSPECTION PROCEDURE
HINT: After the inspection is completed, clear the DTCs.

PROCEDURE

1. CHECK THAT DISC IS INSERTED PROPERLY
(a) Check whether or not the disc is inserted upside down.
OK:
Disc is properly inserted.
NG -- SET DISC
OK -- Continue to next step.
2. DISC CLEANING




(a) Disc cleaning
(1) If dirt is on the disc surface, wipe it with a soft cloth from inside to outside in a radial direction.
NOTE: Do not use a conventional record cleaner or antistatic preservative.

NEXT -- Continue to next step.
3. CHECK DISC




(a) Check that the disc is not deformed or cracked.
OK:
No deformation or cracks on the disc.
NG -- DISC IS FAULTY
OK -- Continue to next step.
4. REPLACE DISC WITH ANOTHER AND RECHECK
(a) Replace the disc with another and recheck.
(1) Replace the disc with a normal one.
(2) Clear the DTC Reading and Clearing Diagnostic Trouble Codes.
(3) Recheck DTCs and check if the same trouble occurs again.
OK:
Malfunction disappears.
NG -- REPLACE TELEVISION DISPLAY ASSEMBLY
OK -- END