Bluetooth TEL Check Mode

NAVIGATION: NAVIGATION SYSTEM: BLUETOOTH TEL CHECK MODE

BLUETOOTH TEL CHECK MODE
HINT: Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.

1. ENTER DIAGNOSTIC MODE Reading and Clearing Diagnostic Trouble Codes
2. "BLUETOOTH" TEL CHECK





(a) Select "'Bluetooth' TEL Check" from the "Diagnosis MENU" screen.

3. "BLUETOOTH" CHECK





(a) Select "'Bluetooth' Check" from the "'Bluetooth' Hands free Check Menu" screen.

(b) Select "Serial Communication Log" from the "'Bluetooth' Check Menu" screen.








(1) The communication log data in the display ECU are displayed on this screen.
HINT: The displayed data can be used as a reference.

(c) Select "Software Version" from the "'Bluetooth' Check Menu" screen.








(1) Check the software version of the "Bluetooth" module.





HINT: This function is controlled by the built-in display ECU.

4. HANDS FREE VOICE QUALITY SET





(a) Select "Hands free Voice Quality Set" from the "'Bluetooth' Hands free Check Menu" screen.





(b) Check the hands free voice level.





HINT: This function is controlled by the built-in display ECU.
NOTE: "Voice Quality Type" should not be changed.