Reassembly

EXTERIOR: FRONT BUMPER: REASSEMBLY

REASSEMBLY

1. INSTALL FRONT BUMPER STAY LH





(a) Engage the 2 claws and install the front bumper stay LH.
(b) Install the bolt and screw.
Bolt - Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
Screw - Torque: 3.0 Nm (31 kgf-cm, 27 in-lbf)
2. INSTALL FRONT BUMPER STAY RH
HINT: Use the same procedures for the RH side and LH side.

3. INSTALL FRONT BUMPER REINFORCEMENT





(a) Install the front bumper reinforcement with the 6 bolts.
Torque: 64 Nm (653 kgf-cm, 47 ft-lbf)
4. INSTALL FRONT BUMPER ENERGY ABSORBER





(a) Engage the 2 guides and install the front bumper energy absorber.
5. INSTALL FRONT BUMPER HOLE COVER LH





(a) Engage the 2 claws and install the front bumper hole cover LH.
6. INSTALL FRONT BUMPER HOLE COVER RH
HINT: Use the same procedure for the RH side and LH side.

7. INSTALL FOG LIGHT COVER LH





(a) Engage the 6 claws and install the fog light cover LH.
8. INSTALL FOG LIGHT COVER RH
HINT: Use the same procedure for the RH side and LH side.

9. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light) Installation
10. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)
HINT: Use the same procedure for the RH side and LH side.