Removal

EXTERIOR: FRONT BUMPER: REMOVAL

REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal
2. REMOVE RADIATOR GRILLE Removal
3. REMOVE FRONT BUMPER ASSEMBLY (w/o Fog Light)





(a) Put protective tape around the front bumper assembly.
HINT: Use the same procedure for the RH side and LH side.





(b) Remove the screw.
HINT: Use the same procedure for the RH side and LH side.

(c) Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.
HINT: Use the same procedure for the RH side and LH side.





(d) Remove the 7 screws and clip.





(e) Disengage the 4 claws and disconnect the front bumper assembly.
HINT: Use the same procedure for the RH side and LH side.

(f) Remove the front bumper assembly.
4. REMOVE FRONT BUMPER ASSEMBLY (w/ Fog Light)





(a) Put protective tape around the front bumper assembly.
HINT: Use the same procedure for the RH side and LH side.





(b) Remove the screw.
HINT: Use the same procedure for the RH side and LH side.

(c) Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.
HINT: Use the same procedure for the RH side and LH side.





(d) Remove the 7 screws and clip.





(e) Disengage the 4 claws and disconnect the front bumper assembly.
HINT: Use the same procedure for the RH side and LH side.

(f) Disconnect each fog light connector, and then remove the front bumper assembly.