Reassembly

EXTERIOR: REAR BUMPER: REASSEMBLY

REASSEMBLY

1. INSTALL NO. 1 REAR BUMPER SIDE SUPPORT





(a) Engage the 2 claws and install a new No. 1 rear bumper side support.
HINT: Use the same procedure for the RH side and LH side.

2. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH





(a) Engage the 3 claws and install a new No. 2 rear bumper side support LH.
(b) Install the 2 screws.
Torque: 3.0 Nm (31 kgf-cm, 27 in-lbf)
3. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH
HINT: Use the same procedures for the RH side and LH side.

4. INSTALL REAR BUMPER SIDE RETAINER LH





(a) Engage the 2 claws and install a new rear bumper side retainer LH.
(b) Install the screw.
Torque: 3.0 Nm (31 kgf-cm, 27 in-lbf)
5. INSTALL REAR BUMPER SIDE RETAINER RH
HINT: Use the same procedures for the RH side and LH side.

6. INSTALL REAR BUMPER REINFORCEMENT





(a) Install the rear bumper reinforcement with the 6 nuts.
Torque: 64 Nm (653 kgf-cm, 47 ft-lbf)
7. INSTALL REAR BUMPER PLATE LH





(a) Engage the 3 claws and install the rear bumper plate LH.
8. INSTALL REAR BUMPER PLATE RH
HINT: Use the same procedure for the RH side and LH side.

9. INSTALL REAR BUMPER BAR





(a) Install the rear bumper bar on the rear bumper energy absorber.
10. INSTALL REAR BUMPER ENERGY ABSORBER





(a) Engage the 2 guides and install the rear bumper energy absorber.
11. INSTALL LOWER REAR BUMPER COVER
(a) Engage the 10 claws and 2 guides, and install the lower rear bumper cover.
(b) Install the 2 clips.





12. INSTALL REFLEX REFLECTOR ASSEMBLY LH





(a) Install the reflex reflector assembly LH with the nut.
13. INSTALL REFLEX REFLECTOR ASSEMBLY RH
HINT: Use the same procedure for the RH side and LH side.