Disassembly

INTERIOR: REAR CONSOLE BOX: DISASSEMBLY

DISASSEMBLY

1. REMOVE BOX BOTTOM MAT
(a) Remove the box bottom mat.
2. REMOVE CONSOLE COMPARTMENT DOOR CUSHION
(a) for Console Compartment Door:

(1) Remove the 2 console compartment door cushions from the console compartment door.
(b) for Rear Console Box Assembly:

(1) Remove the 2 console compartment door cushions from the rear console box assembly.
3. REMOVE CONSOLE COMPARTMENT BOX ASSEMBLY (w/o Rear Air Conditioning System)

(a) Remove the 14 screws and the console compartment box assembly.
4. REMOVE CONSOLE COMPARTMENT BOX ASSEMBLY (w/ Rear Air Conditioning System)

(a) Remove the 14 screws.
(b) Disengage the clamp and remove the console compartment box assembly.
5. REMOVE REAR CONSOLE BOX WIRE (w/ Rear Air Conditioning System)

(a) Disengage the 2 clamps and remove the rear console box wire.
6. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY (w/o Rear Air Conditioning System)

(a) Disengage the 6 clips and remove the console rear end panel sub-assembly.
7. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY (w/ Rear Air Conditioning System)

(a) Disengage the 6 clips and remove the console rear end panel sub-assembly.
8. REMOVE REAR AIR CONDITIONING CONTROL ASSEMBLY (for Manual Air Conditioning System) Removal
9. REMOVE REAR AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System) Removal
10. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY

(a) Remove the 4 screws and the console compartment door sub-assembly.
11. REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY

(a) Remove the 2 screws and the console compartment door lock sub-assembly.
12. REMOVE CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY

(a) Remove the 4 screws.
(b) Disengage the 3 claws and remove the outer console compartment door.

(a) Remove the 3 screws.

(b) Remove the console box cup holder from the console rear end panel as shown in the illustration.
14. REMOVE CONSOLE BOX REGISTER ASSEMBLY (w/o Rear Air Conditioning System)

(a) Using a screwdriver, disengage the 8 claws and remove the console box register assembly from the console rear end panel as shown in the illustration.
HINT: Tape the screwdriver tip before use.