Disassembly

SLIDING ROOF: SLIDING ROOF HOUSING: DISASSEMBLY

DISASSEMBLY

1. REMOVE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY





(a) Remove the 2 bolts and sliding roof drive gear sub-assembly.
2. REMOVE SUNSHADE TRIM SUB-ASSEMBLY





(a) Remove the screw and sliding roof piece sub-assembly LH.
HINT: Use the same procedure for the RH side and the LH side.





(b) Slide and remove the sunshade trim sub-assembly.
3. REMOVE SLIDING ROOF DRIVE CABLE SUB-ASSEMBLY
NOTE: Disassemble the sliding roof drive cable sub-assembly only when replacing it.





(a) Remove the screw and sliding roof side stopper.
HINT: Use the same procedure for the RH side and the LH side.





(b) Using a screwdriver, disengage the 2 claws. Then slide the sliding roof drip channel rearward to remove it.
HINT: Tape the screwdriver tip before use.

(c) Using a screwdriver, slide the sliding roof drive cable sub-assembly in the direction indicated by the arrow in the illustration to remove it.