Disassembly

SEAT: REAR NO. 2 SEAT ASSEMBLY: DISASSEMBLY

DISASSEMBLY

1. REMOVE RECLINING COVER PROTECTOR LH

(a) Remove the 2 screws and the reclining cover protector LH.
2. REMOVE NO. 2 SEAT HINGE COVER LH

(a) Remove the 2 screws and the No. 2 seat hinge cover LH.
3. REMOVE RECLINING COVER PROTECTOR RH

(a) Remove the 2 screws and the reclining cover protector RH.
4. REMOVE NO. 2 SEAT HINGE COVER RH

(a) Remove the 2 screws and the No. 2 seat hinge cover RH.
5. REMOVE REAR NO. 2 SEAT CUSHION COVER WITH PAD
(a) Disengage the 13 hooks.

(b) Remove the 4 hog rings and the rear No. 2 seat cushion cover with pad.

6. REMOVE REAR NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY
(a) Remove the 14 hog rings and the rear No. 2 seat cushion cover sub-assembly.

7. REMOVE NO. 1 REAR SIDE SEAT BAND SUB-ASSEMBLY

(a) Remove the 2 clips.
(b) Separate the fastener and the rear side seat band sub-assembly.
8. REMOVE REAR SEAT LOCK STRIKER COVER

(a) Using a screwdriver wrapped with protective tape, disengage the claw.
(b) Disengage the 2 guides and remove the rear seat lock striker cover.
9. REMOVE REAR NO. 2 SEAT HANDLE

(a) Remove the 2 screws.

(b) Remove the clamp.
(c) Disconnect the 2 cable clamps and remove the rear No. 2 seat handle as shown in the illustration.

10. REMOVE NO. 2 SEATBACK BOARD SUB-ASSEMBLY
(a) Disengage the 7 clips.

(b) Disengage the 3 hooks and remove the No. 2 seatback board sub-assembly.
11. REMOVE NO. 1 REAR SEAT COVER BEZEL

(a) Remove the 2 screws.
(b) Separate the hook and the No. 1 rear side seat band sub-assembly with No. 1 rear seat cover bezel.

(b) Disengage the 15 hooks.

(c) Disengage the 16 clips and remove the rear No. 2 seatback cover with pad.
13. REMOVE REAR NO. 2 SEATBACK COVER SUB-ASSEMBLY
(a) Remove the 18 hog rings and the rear No. 2 seatback cover sub-assembly.

14. REMOVE NO. 2 REAR SEAT RECLINING COVER LH

(a) Remove the screw.
(b) Disengage the guide and remove the No. 2 rear seat reclining cover LH.
15. REMOVE NO. 2 REAR SEAT RECLINING COVER RH

(a) Remove the screw.
(b) Disengage the guide and remove the No. 2 rear seat reclining cover RH.
16. REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY LH

(a) Remove the 2 screws and the rear No. 2 seat headrest cover LH.

(b) Disconnect the 2 cable clamps.
(c) Remove the 3 nuts and the rear No. 2 seat headrest assembly LH.
17. REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY RH

(a) Remove the 2 screws and the rear No. 2 seat headrest cover RH.

(b) Disconnect the 2 cable clamps.
(c) Remove the 3 nuts and the rear No. 2 seat headrest assembly RH.
18. REMOVE REAR SEATBACK EDGE PROTECTOR

(a) Disengage the 8 claws and remove the 4 rear seatback edge protectors.
19. REMOVE NO. 2 REAR SEAT CUSHION LOCK CABLE ASSEMBLY LH

(a) Remove the clamp.
(b) Disconnect the 2 cable clamps and remove the No. 2 rear seat cushion lock cable assembly LH.
20. REMOVE NO. 1 REAR SEAT LOCK CABLE ASSEMBLY LH

(a) Disconnect the 2 cable clamps and remove the No. 1 rear seat lock cable assembly LH.
21. REMOVE NO. 2 REAR SEAT CUSHION LOCK CABLE ASSEMBLY RH

(a) Remove the clamp.
(b) Disconnect the 2 cable clamps and remove the No. 2 rear seat cushion lock cable assembly RH.
22. REMOVE NO. 1 REAR SEAT LOCK CABLE ASSEMBLY RH

(a) Disconnect the 2 cable clamps and remove the No. 1 rear seat lock cable assembly RH.
23. REMOVE NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY

(a) Remove the 2 nuts, 2 bolts[A], 2 spiral springs and the 2 E-rings.
(b) Remove the 2 bolts [B] and the 2 bushes.
(c) Remove the 2 bolts [C], 2 washers and the No. 2 seat cushion frame sub-assembly.