Installation

SEAT: REAR NO. 2 SEAT ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL REAR NO. 2 SEAT ASSEMBLY





(a) Install the rear No. 2 seat assembly with the 4 bolts.
Torque: 37 Nm (377 kgf-cm, 27 ft-lbf)
2. CONNECT REAR SEAT LAP TYPE BELT ASSEMBLY RH Installation
3. CONNECT REAR SEAT LAP TYPE BELT ASSEMBLY LH Installation
4. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY Installation
5. INSTALL DECK FLOOR BOARD ASSEMBLY Installation
6. INSTALL REAR MAT Installation
7. INSTALL DECK SIDE TRIM BOX RH Installation
8. INSTALL JACK CARRIER ASSEMBLY Installation
9. INSTALL JACK ASSEMBLY Installation
10. INSTALL JACK CARRIER CUSHION Installation
11. INSTALL JACK CARRIER SUPPORT
12. INSTALL REAR SEAT SIDE COVER RH Installation
13. INSTALL DECK SIDE TRIM BOX LH Installation
14. INSTALL REAR SEAT SIDE COVER LH Installation
15. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
16. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY Installation
17. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY Installation
18. INSTALL DECK BOARD ASSEMBLY Installation