Installation

ENGINE HOOD / DOOR: POWER BACK DOOR TOUCH SENSOR: INSTALLATION

INSTALLATION

1. INSTALL POWER BACK DOOR SENSOR ASSEMBLY





(a) Install the power back door sensor assembly with the 4 bolts and engage the 2 clips.
Torque: 1.2 Nm (12 kgf-cm, 11 in-lbf)
(b) Connect the connector.
2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY Reassembly
3. INSTALL ASSIST STRAP ASSEMBLY Reassembly
4. INSTALL ASSIST STRAP HOLE COVER Reassembly
5. INSTALL BACK DOOR LOCK COVER Reassembly
6. INSTALL BACK DOOR TRIM COVER LH Reassembly
7. CONNECT POWER BACK DOOR ROD Reassembly
8. INSTALL BACK DOOR SERVICE HOLE COVER LH Reassembly
9. INSTALL BACK DOOR TRIM COVER RH Reassembly
10. INSTALL BACK WINDOW UPPER TRIM PANEL ASSEMBLY Reassembly