Installation

LIGHTING: HEADLIGHT ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL HEADLIGHT ASSEMBLY
(a) Connect the connectors.





(b) Engage the clamp.





(c) Engage the claw and install the headlight assembly with the bolt and 2 screws.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
2. INSTALL REAR FENDER SPLASH SHIELD SUB-ASSEMBLY





(a) Engage the 3 clips and 3 guides, and install the rear fender splash shield sub-assembly.
3. INSTALL FRONT BUMPER ASSEMBLY (w/o Fog Light) Installation
4. INSTALL FRONT BUMPER ASSEMBLY (w/ Fog Light) Installation
5. INSTALL RADIATOR GRILLE Installation
6. INSTALL COOL AIR INTAKE DUCT SEAL Installation
7. VEHICLE PREPARATION FOR HEADLIGHT AIMING ADJUSTMENT Adjustments
8. PREPARATION FOR HEADLIGHT AIMING (Using a headlight aim test machine) Adjustments
9. PREPARATION FOR HEADLIGHT AIMING (Using a Screen) Adjustments
10. INSPECT HEADLIGHT AIMING Adjustments
11. ADJUST HEADLIGHT AIMING Adjustments
12. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT (w/ Fog Light) Adjustments
13. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments
14. INSPECT FOG LIGHT AIMING (w/ Fog Light) Adjustments
15. ADJUST FOG LIGHT AIMING (w/ Fog Light) Adjustments