Removal

2GR-FE ENGINE CONTROL SYSTEM: VVT SENSOR: REMOVAL

REMOVAL

1. REMOVE ENGINE UNDER COVER ASSEMBLY Removal
2. REMOVE NO. 1 ENGINE UNDER COVER Removal
3. DRAIN ENGINE COOLANT Service and Repair
4. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal
5. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal
6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal
7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Removal
8. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal
9. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
10. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal
11. DISCONNECT ENGINE ROOM MAIN WIRE Removal
12. REMOVE NO. 1 SURGE TANK STAY Removal
13. REMOVE THROTTLE BODY BRACKET Removal
14. REMOVE INTAKE AIR SURGE TANK ASSEMBLY Removal
15. SEPARATE HARNESS PROTECTOR Removal
16. REMOVE VVT SENSOR (for Bank 1)
(a) Intake side:




(1) Remove the bolt and VVT sensor.
(b) Exhaust side:




(1) Remove the bolt and VVT sensor.
17. REMOVE VVT SENSOR (for Bank 2)
(a) Intake side:




(1) Remove the bolt and VVT sensor.
(b) Exhaust side:




(1) Remove the bolt and VVT sensor.