Removal

BRAKE CONTROL: DOWNHILL ASSIST CONTROL SWITCH (for 4WD): REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Repair Instruction - Initialization

2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Smart Key System) Removal
3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/ Smart Key System) Removal
4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
5. REMOVE DOWNHILL ASSIST CONTROL SWITCH





(a) Remove the downhill assist control switch connector.





(b) Disengage the 2 claws and remove the downhill assist control switch.