Installation

AIR CONDITIONING: SOLAR SENSOR: INSTALLATION

INSTALLATION

1. INSTALL SOLAR SENSOR





(a) Engage the 2 claws and install the solar sensor.
(b) Connect the connector.
2. INSTALL DEFROSTER NOZZLE ASSEMBLY Reassembly
3. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT Reassembly
4. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT Reassembly
5. INSTALL NO. 4 HEATER TO REGISTER DUCT Reassembly
6. INSTALL NO. 1 HEATER TO REGISTER DUCT Reassembly
7. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY (for Pole Antenna Type) Installation
8. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY (for Glass Antenna Type) Installation
9. CONNECT INSTRUMENT PANEL WIRE ASSEMBLY Installation
10. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side) Installation
11. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY Installation
12. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side) Installation
13. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY Installation
14. INSTALL FRONT PILLAR GARNISH RH Installation
15. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH Installation
16. INSTALL FRONT PILLAR GARNISH LH Installation
17. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH Installation
18. INSTALL ENGINE SWITCH (w/ Smart Key System) Installation
19. INSTALL FRONT NO. 2 CONSOLE BOX INSERT Installation
20. INSTALL FRONT NO. 1 CONSOLE BOX INSERT Installation
21. INSTALL CONSOLE BOX ASSEMBLY (w/o Rear Air Conditioning System) Installation
22. INSTALL CONSOLE BOX ASSEMBLY (w/ Rear Air Conditioning System) Installation
23. INSTALL LOWER REAR CONSOLE BOX Installation
24. INSTALL NO. 2 CONSOLE BOX DUCT (w/o Rear Air Conditioning System) Installation
25. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation
26. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation
27. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation
28. INSTALL FRONT DOOR SCUFF PLATE LH Installation
29. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation
30. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation
31. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation
32. INSTALL FRONT DOOR SCUFF PLATE RH Installation
33. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System) Installation
34. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System) Installation
35. INSTALL AIR CONDITIONING CONTROL ASSEMBLY Installation
36. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Key System) Installation
37. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Key System) Installation
38. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Installation
39. INSTALL COMBINATION METER ASSEMBLY Installation
40. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Installation
41. POSITION FRONT WHEELS STRAIGHT AHEAD
42. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY Installation
43. INSTALL STEERING COLUMN COVER Installation
44. ADJUST SPIRAL CABLE SUB-ASSEMBLY Installation
45. INSTALL STEERING WHEEL ASSEMBLY Installation
46. INSPECT STEERING WHEEL CENTER POINT
47. INSTALL STEERING PAD Installation
48. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation
49. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation
50. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

51. INSPECT STEERING PAD Installation
52. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.