Operation CHARM: Car repair manuals for everyone.

Horn Switch: Testing and Inspection








HORN: STEERING PAD SWITCH: INSPECTION

INSPECTION

1. INSPECT STEERING PAD SWITCH ASSEMBLY (w/ Microphone)
(a) Disconnect steering pad switch assembly connector A from the steering pad.
(b) Disconnect steering pad switch assembly connector B from the spiral cable.





(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:





If the result is not as specified, replace the steering pad switch assembly.
2. INSPECT STEERING PAD SWITCH LH (w/o Microphone)
(a) Disconnect steering pad switch LH connector A from the steering pad.
(b) Disconnect steering pad switch LH connector B from the spiral cable.





(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:





If the result is not as specified, replace the steering pad switch LH.