Ignition Relay

2GR-FE STARTING: IGNITION RELAY: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. INSPECT IGNITION RELAY
(a) Inspect the No. 1 ignition relay.




(1) Using an ohmmeter, measure the resistance according to the value(s) in the table below.
Standard resistance:






If the resistance is not as specified, replace the No. 1 ignition relay.
(b) Inspect the No. 2 ignition relay.




(1) Using an ohmmeter, measure the resistance according to the value(s) in the table below.
Standard resistance:






If the resistance is not as specified, replace the No. 2 ignition relay.