Removal

WINDSHIELD / WINDOWGLASS: QUARTER WINDOW GLASS: REMOVAL

REMOVAL

1. REMOVE REAR CENTER SEAT ASSEMBLY
2. REMOVE REAR SEAT HEADREST ASSEMBLY (for LH Side) Removal
3. REMOVE REAR SEAT TRACK BRACKET COVER LH Removal
4. REMOVE REAR OUTER TRACK BRACKET COVER LH Removal
5. REMOVE REAR INNER TRACK BRACKET COVER LH Removal
6. REMOVE REAR SEAT LEG SIDE COVER LH Removal
7. DISCONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY LH (w/ Remote Folding Function) Removal
8. REMOVE REAR NO. 1 SEAT ASSEMBLY LH Removal
9. REMOVE REAR SEAT HEADREST ASSEMBLY (for RH Side)
10. REMOVE REAR SEAT TRACK BRACKET COVER RH Removal
11. REMOVE REAR OUTER TRACK BRACKET COVER RH Removal
12. REMOVE REAR INNER TRACK BRACKET COVER RH Removal
13. REMOVE REAR SEAT LEG SIDE COVER RH Removal
14. DISCONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY RH (w/ Remote Folding Function)
HINT: Use the same procedure for the RH side and the LH side.

15. REMOVE REAR NO. 1 SEAT ASSEMBLY RH Removal
16. REMOVE FRONT DOOR SCUFF PLATE LH Removal
17. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal
18. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH Removal
19. REMOVE FRONT PILLAR GARNISH LH Removal
20. REMOVE REAR DOOR SCUFF PLATE LH Removal
21. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH Removal
22. REMOVE LOWER CENTER PILLAR GARNISH LH Removal
23. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH Removal
24. REMOVE CENTER PILLAR GARNISH LH Removal
25. REMOVE FRONT DOOR SCUFF PLATE RH
HINT: Use the same procedure for the RH side and the LH side.

26. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side.

27. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
HINT: Use the same procedure for the RH side and the LH side.

28. REMOVE FRONT PILLAR GARNISH RH Removal
29. REMOVE REAR DOOR SCUFF PLATE RH
HINT: Use the same procedure for the RH side and the LH side.

30. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
HINT: Use the same procedure for the RH side and the LH side.

31. REMOVE LOWER CENTER PILLAR GARNISH RH
HINT: Use the same procedure for the RH side and the LH side.

32. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side.

33. REMOVE CENTER PILLAR GARNISH RH
HINT: Use the same procedure for the RH side and the LH side.

34. REMOVE DECK BOARD ASSEMBLY Removal
35. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY Removal
36. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY Removal
37. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
38. REMOVE REAR NO. 1 FLOOR BOARD (w/o Rear No. 2 Seat) Removal
39. REMOVE REAR SEAT SIDE COVER LH (w/ Rear No. 2 Seat) Removal
40. REMOVE DECK SIDE TRIM BOX LH Removal
41. REMOVE REAR SEAT SIDE COVER RH (w/ Rear No. 2 Seat) Removal
42. REMOVE JACK CARRIER SUPPORT
43. REMOVE JACK CARRIER CUSHION Removal
44. REMOVE JACK ASSEMBLY Removal
45. REMOVE JACK CARRIER ASSEMBLY Removal
46. REMOVE DECK SIDE TRIM BOX RH Removal
47. REMOVE DECK FLOOR BOARD ASSEMBLY (w/o Rear No. 2 Seat) Removal
48. REMOVE REAR MAT Removal
49. REMOVE DECK FLOOR BOARD ASSEMBLY (w/ Rear No. 2 Seat) Removal
50. REMOVE REAR DECK FLOOR BOX (w/o Rear No. 2 Seat) Removal
51. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY (w/ Rear No. 2 Seat) Removal
52. DISCONNECT REAR SEAT LAP TYPE BELT ASSEMBLY LH (w/ Rear No. 2 Seat) Removal
53. DISCONNECT REAR SEAT LAP TYPE BELT ASSEMBLY RH (w/ Rear No. 2 Seat) Removal
54. REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat) Removal
55. REMOVE REAR FLOOR FINISH PLATE Removal
56. REMOVE DECK SIDE TRIM COVER LH Removal
57. REMOVE DECK SIDE TRIM LH Removal
58. REMOVE SIDE TRIM COVER LH (w/o Rear Seat Entertainment System) Removal
59. REMOVE POWER OUTLET SOCKET BEZEL (w/ Rear Seat Entertainment System) Removal
60. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH Removal
61. REMOVE REAR POWER POINT SOCKET ASSEMBLY Removal
62. REMOVE REAR POWER OUTLET SOCKET COVER Removal
63. REMOVE REAR DECK TRIM COVER (w/o Remote Folding Function) Removal
64. REMOVE RECLINING REMOTE CONTROL LEVER BEZEL LH (w/ Remote Folding Function) Removal
65. REMOVE ROPE HOOK ASSEMBLY (for LH Side) Removal
66. REMOVE NO. 2 DECK SIDE TRIM HOOK Removal
67. REMOVE FRONT DECK SIDE TRIM COVER LH Removal
68. DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH Removal
69. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH Removal
70. REMOVE QUARTER PILLAR GARNISH LH Removal
71. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH (w/o Power Back Door) Removal
72. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH (w/ Power Back Door) Removal
73. REMOVE REAR SEAT SIDE GARNISH CAP (w/o Rear Air Conditioning System) Removal
74. REMOVE REAR SEAT SIDE GARNISH CAP (w/ Rear Air Conditioning System) Removal
75. REMOVE DECK SIDE TRIM COVER RH
HINT: Use the same procedure for the RH side and the LH side.

76. REMOVE DECK SIDE TRIM RH
HINT: Use the same procedure for the RH side and the LH side.

77. REMOVE SIDE TRIM COVER RH (w/o Rear Automatic Air Conditioning System) Removal
78. REMOVE REAR ROOM TEMPERATURE SENSOR (w/ Rear Automatic Air Conditioning System) Removal
79. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH Removal
80. REMOVE ROPE HOOK ASSEMBLY (for RH Side)
HINT: Use the same procedure for the RH side and the LH side.

81. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
HINT: Use the same procedure for the No. 1 luggage compartment trim hook and the No. 2 deck side trim hook.

82. REMOVE FRONT DECK SIDE TRIM COVER RH
HINT: Use the same procedure for the RH side and the LH side.

83. DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side.

84. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH Removal
85. REMOVE QUARTER PILLAR GARNISH RH
HINT: Use the same procedure for the RH side and the LH side.

86. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH (w/o Rear No. 2 Seat)
HINT: Use the same procedure for the RH side and the LH side.

87. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH (w/ Rear No. 2 Seat)
HINT: Use the same procedure for the RH side and the LH side.

88. REMOVE ROOF CONSOLE BOX ASSEMBLY Removal
89. REMOVE VISOR BRACKET COVER (for LH Side) Removal
90. REMOVE VISOR ASSEMBLY LH Removal
91. REMOVE VISOR BRACKET COVER (for RH Side)
HINT: Use the same procedure for the RH side and the LH side.

92. REMOVE VISOR ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side.

93. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror) Removal
94. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Standard) Removal
95. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Independent Type) Removal
96. REMOVE NO. 2 ROOM LIGHT ASSEMBLY
97. REMOVE TELEVISION BASE (w/ Rear Seat Entertainment System) Removal
98. REMOVE TELEVISION DISPLAY ASSEMBLY (w/ Rear Seat Entertainment System) Removal
99. REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY (w/o Sliding Roof) Removal
100. REMOVE REAR ASSIST GRIP SUB-ASSEMBLY (w/o Sliding Roof) Removal
101. REMOVE ASSIST GRIP ASSEMBLY (w/ Sliding Roof) Removal
102. REMOVE ROOF HEADLINING TRIM CLIP STOPPER Removal
103. REMOVE SUN ROOF OPENING TRIM MOULDING (w/ Sliding Roof)
104. REMOVE VISOR HOLDER Removal
105. REMOVE ROOF HEADLINING ASSEMBLY (w/o Sliding Roof) Removal
106. REMOVE ROOF HEADLINING ASSEMBLY (w/ Sliding Roof) Removal
107. REMOVE QUARTER WINDOW ASSEMBLY





(a) Apply protective tape to the outer surface of the vehicle body to prevent scratches.





(b) From the interior, insert a piano wire between the vehicle body and glass as shown in the illustration.
(c) Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
NOTE: When separating the quarter window assembly from the vehicle, be careful not to damage the vehicle's paint or interior/exterior ornaments.

(d) Cut through the adhesive by pulling the piano wire around the quarter window assembly.
NOTE: Leave as much adhesive on the vehicle body as possible when cutting through the adhesive.





(e) Disengage the 3 clips.
NOTE: Please be careful not to break it because there is not the supplying of a clip.

(f) Disengage the retainer.
NOTE: Please be careful not to break it because there is not the supplying of a retainer.

(g) Using suction cups, remove the glass.
NOTE: Be careful not to drop the glass.

108. CLEAN QUARTER WINDOW ASSEMBLY





(a) Clean the outer edges of the glass with a non-residue solvent.

NOTICE:
- Do not touch the glass surface after cleaning it.
- Be careful not to damage the glass, retainer, and spacers.
- Ever if using a new glass, clean the glass with a non-residue solvent.

109. CLEAN VEHICLE BODY





(a) Clean and shape the contact surfaces of the vehicle body.
(1) On the contact surfaces of the vehicle body, use a knife to cut away excess adhesive as shown in the illustration.
HINT: Leave as much adhesive on the vehicle body as possible.
NOTE: Be careful not to damage the vehicle body.
(2) Clean the contact surfaces of the vehicle body with cleaner.
HINT: Even if all the adhesive has been removed, clean the vehicle body.