Power Back Door Control Switch (for Driver Side)

DOOR / HATCH: POWER BACK DOOR CONTROL SWITCH (for Driver Side): INSPECTION

INSPECTION

1. INSPECT BACK DOOR CONTROL SWITCH





(a) Inspect the resistance of the switch.

Standard Resistance:





If the result is not as specified, replace the back door control switch.





(b) Check the illumination operation.
(1) Connect the positive (+) battery lead to terminal 5 (ILL+) and the negative (-) battery lead to terminal 4 (ILL-), then check that the illumination illuminates.
OK:
Illumination illuminates.
If the illumination does not illuminate, replace the back door control switch.