Power Back Door Control Switch (for Luggage Compartment)

DOOR / HATCH: POWER BACK DOOR CONTROL SWITCH (for Luggage Compartment): INSPECTION

INSPECTION

1. INSPECT BACK DOOR CONTROL SWITCH





(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, replace the switch.





(b) Check the illumination operation.
(1) Connect the positive (+) battery lead to terminal 7 (ILL+) and the negative (-) battery lead to terminal 6 (ILL-), then check that the illumination illuminates.
OK:
Illumination illuminates.
If the illumination does not illuminate, replace the back door control switch.