Installation

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALLATION

INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH





(a) Install the switch, as shown in the illustration.





(b) Install the 2 screws.
(c) Connect the connector.
2. INSTALL STEERING PAD Installation
3. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation
4. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTE: When disconnecting the cable some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
6. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.