Installation

SUSPENSION CONTROL: FRONT ACCELERATION SENSOR: INSTALLATION

INSTALLATION





1. INSTALL ACCELERATION SENSOR ASSEMBLY (for LH Side)
(a) Install the acceleration sensor with the nut.
Torque: 8.5 Nm (87 kgf-cm, 75 in-lbf)
(b) Connect the acceleration sensor connector.





2. INSTALL ACCELERATION SENSOR ASSEMBLY (for RH Side)
(a) Install the acceleration sensor with the nut.
Torque: 8.5 Nm (87 kgf-cm, 75 in-lbf)
(b) Connect the acceleration sensor connector.
3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH Installation
4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation
5. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT Installation
6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH Installation
7. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Installation
8. INSTALL INSTRUMENT SIDE PANEL LH Installation
9. INSTALL INSTRUMENT SIDE PANEL RH Installation
10. INSTALL COWL SIDE TRIM BOARD LH Installation
11. INSTALL COWL SIDE TRIM BOARD RH Installation
12. INSTALL FRONT DOOR SCUFF PLATE LH Installation
13. INSTALL FRONT DOOR SCUFF PLATE RH Installation