Removal

JF3A TRANSFER / 4WD / AWD: 4WD CONTROL ECU: REMOVAL

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE RH
(a) Remove the front door scuff plate RH ( Removal).
HINT: Use the same procedures described for the LH side.

2. REMOVE COWL SIDE TRIM BOARD RH
(a) Remove the front door scuff plate RH ( Removal).
HINT: Use the same procedures described for the LH side.

3. REMOVE INSTRUMENT SIDE PANEL RH Removal
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH Removal
5. REMOVE 4WD CONTROL ECU





(a) Disconnect the 2 4WD control ECU connectors.
(b) Remove the bolt and 4WD control ECU.