Installation

JF3A TRANSFER / 4WD / AWD: 4WD CONTROL ECU: INSTALLATION

INSTALLATION

1. INSTALL 4WD CONTROL ECU





(a) Install the ECU with the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the 2 ECU connectors.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH Installation
3. INSTALL INSTRUMENT SIDE PANEL RH Installation
4. INSTALL COWL SIDE TRIM BOARD RH
(a) Install the cowl side trim board RH ().
HINT: Use the same procedures described for the LH side.

5. INSTALL FRONT DOOR SCUFF PLATE RH
(a) Install the front door scuff plate RH ().
HINT: Use the same procedures described for the LH side.