Installation

HORN: HORN SYSTEM: INSTALLATION

INSTALLATION





1. INSTALL HIGH PITCHED HORN ASSEMBLY
(a) Place the stay onto the baffle part in the upper radiator support, and then install the horn with the bolt.
Torque: 9.9 Nm (101 kgf-cm, 88 in-lbf)
(b) Connect the connector.
2. INSTALL LOW PITCHED HORN ASSEMBLY
(a) Place the stay onto the baffle part in the upper radiator support, and then install the horn with the bolt.
Torque: 9.9 Nm (101 kgf-cm, 88 in-lbf)
(b) Connect the connector.
3. INSTALL RADIATOR GRILLE Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)