Reassembly

AXLE: FRONT AXLE HUB (for 4WD and Pre-Runner): REASSEMBLY

REASSEMBLY





1. INSTALL FRONT AXLE HUB OIL SEAL
(a) Using a brass bar and a hammer, install a new front axle hub oil seal.
NOTICE: Do not damage the oil seal.





2. INSTALL FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY
(a) Using SST and a press, install a new bearing onto the front axle hub.
SST: 09649-17010





3. INSTALL FRONT AXLE HUB
(a) Apply MP grease to a new O-ring.
(b) Install the new O-ring onto the axle hub.
(c) Install the dust cover and axle hub onto the steering knuckle with the 4 bolts.
Torque: 80 Nm (816 kgf-cm, 59 ft-lbf)





4. INSTALL FRONT WHEEL ADJUSTING NUT (for Pre-Runner)
(a) Using SST, install a new front wheel adjusting nut.
SST: 09318-12010
Torque: 275 Nm (2,804 kgf-cm, 203 ft-lbf)





5. INSTALL FRONT AXLE HUB OIL SEAL (for 4WD)
(a) Using SST and a press, install a new front axle hub oil seal.
SST: 09527-17011
SST: 09950-70010
09951-07100
SST: 09951-01000





6. INSTALL KNUCKLE GREASE RETAINER CAP (for Pre-Runner)
(a) Using a brass bar and a hammer, install a new knuckle grease retainer cap.
NOTICE: Do not damage the knuckle grease retainer cap.