Installation

1GR-FE EMISSION CONTROL: HEATED OXYGEN SENSOR: INSTALLATION

INSTALLATION

1. INSTALL HEATED OXYGEN SENSOR
(a) Using SST, install the 2 heated oxygen sensors onto the exhaust pipe.
SST: 09224-00010
Torque: 44 Nm (449 kgf-cm, 33 ft-lbf)





(b) Connect the 2 heated oxygen sensor connectors.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
3. CHECK FOR EXHAUST GAS LEAKAGE