Installation

SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG ASSEMBLY (for Access Cab): INSTALLATION

INSTALLATION

1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY
(a) Install the curtain shield assembly with the 11 bolts and 6 claws as shown in the illustration.





Torque: 9.8 Nm (100 kgf-cm, 87 in-lbf)
NOTICE: Do not twist the curtain shield airbag assembly.

(b) Connect the connector
NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

2. INSTALL ROOF HEADLINING ASSEMBLY
(a) Install the roof headlining assembly Installation.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
4. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.