Removal

SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG ASSEMBLY (for Access Cab): REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE ROOF HEADLINING ASSEMBLY
(a) Remove the roof headlining assembly Removal.
3. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY
(a) Disconnect the connector.
NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Remove the 11 bolts and disengage the 6 claws and remove the curtain shield airbag assembly in the order show in the illustration.