Installation

SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG ASSEMBLY (for Double Cab): INSTALLATION

INSTALLATION

1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY
(a) Install the curtain shield assembly with the 10 bolts and clip in the order shown in the illustration.





Torque: 9.8 Nm (100 kgf-cm, 7 ft-lbf)
NOTICE: Do not twist the curtain shield airbag assembly.

(b) Connect the connector to the curtain shield airbag assembly.
NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

2. INSTALL ROOF HEADLINING ASSEMBLY
HINT: Double Cab Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
4. INSPECT SRS WARNING LIGHT Diagnosis System