Removal

SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG CUT-OFF SWITCH: REMOVAL

REMOVAL

1. PRECAUTION Service Precautions
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3. REMOVE INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake) Removal
4. REMOVE INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake) Removal
5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY Removal
6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET Removal
7. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Disassembly
8. REMOVE NO.1 LOWER INSTRUMENT PANEL FINISH PANEL Removal
9. REMOVE INSTRUMENT LOWER PANEL LH Removal
10. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal
11. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal
12. REMOVE SWITCH BASE HOLE COVER





(a) Disengage the 3 claws and remove the switch base hole cover.
13. REMOVE AIRBAG CUT OFF SWITCH





(a) Disconnect the airbag cut off switch connector.
(b) Remove the instrument cluster finish panel sub-assembly center while holding the 2 claws of the airbag cut off switch.