Curtain Shield Airbag Cutoff Switch

SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG CUTOFF SWITCH: INSPECTION

INSPECTION

1. INSPECT CURTAIN AIRBAG CUTOFF SWITCH





(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:





If the result is not as specified, replace the curtain airbag cutoff switch.





(b) Check the illumination operation.
(1) Connect the positive (+) battery lead to terminal 2 (ILL+) and the negative (-) battery lead to terminal 1 (ILL-), and then check that the illumination illuminates.
OK:
Illumination illuminates.
If the illumination does not illuminate, replace the curtain airbag cutoff switch.