On-Vehicle Inspection

DIFFERENTIAL: DIFFERENTIAL SYSTEM: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION
NOTICE:
- Switch the four wheel drive control switch when the A/T shift lever is in the N position and the vehicle speed is 3 mph (5km/h) or less.
- Switch the four wheel drive control switch when the clutch start switch is turned ON and the vehicle speed is 2mph (3 km/h) or less.
- Do not change from H2 to H4 when the vehicle speed is 62 mph (100 km/h) or more.





1. INSPECT H2 (2WD)-H4 (4WD) SHIFT
(a) Start the engine.
(b) Turn the four wheel drive control switch from the H2 position to the H4 position.
(c) Check that the 4WD indicator light blinks and then stays on.
(d) Turn the four wheel drive control switch from the H4 position to the H2 position.
(e) Check that the 4WD indicator light blinks and then goes off.





2. INSPECT H4 (4WD)-L4 (4WD) SHIFT
(a) Start the engine.
(b) Turn the four wheel drive control switch from the H4 position to the L4 position while pressing it.
(c) Check that the 4LO indicator light blinks and then stays on.
(d) Turn the four wheel drive control switch from the L4 position to the H4 position while pressing it.
(e) Check that the 4LO indicator light blinks and then goes off.





3. INSPECT H2 (2WD)-L4 (4WD) SHIFT
(a) Start the engine.
(b) Turn the four wheel drive control switch from the H2 position to the H4 position.
(c) Check that the 4WD indicator light blinks and then stays on.
(d) Turn the four wheel drive control switch from the H4 position to the L4 position while pressing it.
(e) Check that the 4LO indicator light blinks and then stays on.





4. INSPECT L4 (4WD)-H2 (2WD) SHIFT
(a) Start the engine.
(b) Turn the four wheel drive control switch from the L4 position to the H4 position while pressing it.
(c) Check that the 4LO indicator light blinks and then goes off.
(d) Turn the four wheel drive control switch from the H4 position to the H2 position.
(e) Check that the 4WD indicator light blinks and then goes off.