Audio and Visual System

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 44-46: Disc Crack
44-46 - Disc Crack

DESCRIPTION





INSPECTION PROCEDURE

HINT
After the inspection is completed, clear the DTCs.

PROCEDURE

1. CHECK THAT DISC IS INSERTED PROPERLY

(a) Check whether or not the disc is inserted upside down.

OK:

Disc is properly inserted.

NG -- SET DISC
OK -- Continue to next step.

2. DISC CLEANING

(a) Disc cleaning





(1) If dirt is on the disc surface, wipe it with a soft cloth from inside to outside in a radial direction.

NOTICE:
Do not use a conventional record cleaner or antistatic preservative.

NEXT -- Continue to next step.

3. CHECK DISC

(a) Check that the disc is not deformed or cracked.





OK:

No deformation or cracks on the disc.

NG -- DISC IS FAULTY
OK -- Continue to next step.

4. REPLACE DISC WITH ANOTHER AND RECHECK

(a) Replace the disc with another and recheck.

(1) Replace the disc with a normal one.

(2) Clear the DTC Reading and Clearing Diagnostic Trouble Codes.

(3) Recheck DTCs and check if the same trouble occurs again.

OK:

Malfunction disappears.

NG -- REPLACE TELEVISION DISPLAY ASSEMBLY

OK -- END