Bluetooth TEL Check Mode

NAVIGATION: NAVIGATION SYSTEM: BLUETOOTH TEL CHECK MODE

HINT
Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.

1. ENTER DIAGNOSTIC MODE Reading and Clearing Diagnostic Trouble Codes

2. "BLUETOOTH" TEL CHECK

(a) Select "'Bluetooth' TEL Check" from the "Diagnosis MENU" screen.





3. "BLUETOOTH" CHECK

(a) Select "'Bluetooth' Check" from the "'Bluetooth' Handsfree Check Menu" screen.





(b) Select "Serial Communication Log" from the "'Bluetooth' Check Menu" screen.





(1) The communication log data in the display ECU are displayed on this screen.





HINT
The displayed data can be used as a reference.

(c) Select "Software Version" from the "'Bluetooth' Check Menu" screen.





(1) Check the software version of the "Bluetooth" module.









HINT
This function is controlled by the built-in display ECU.

4. HANDSFREE VOICE QUALITY SET

(a) Select "Handsfree Voice Quality Set" from the "'Bluetooth' Handsfree Check Menu" screen.





(b) Check the handsfree voice level.









HINT
This function is controlled by the built-in display ECU.

NOTICE:
"Voice Quality Type" should not be changed.