Reassembly

ENGINE HOOD / DOOR: HOOD: REASSEMBLY

1. CONNECT WASHER HOSE ASSEMBLY

(a) Connect the washer hose assembly.





2. ADJUST WASHER NOZZLE SUB-ASSEMBLY Adjustments

3. INSTALL WASHER NOZZLE SUB-ASSEMBLY Installation

4. INSTALL HOOD INSULATOR

(a) Install the hood insulator with the 8 clips.





5. INSTALL HOOD TO RADIATOR SUPPORT SEAL

(a) Install the hood to radiator support seal with the 8 clips.





6. INSTALL RADIATOR SEAL SUB-ASSEMBLY

(a) Clean the vehicle body surface.

(1) Wipe off any tape adhesive residue with cleaner.

(b) Remove the release paper from the radiator seal sub-assembly.

HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.

(c) Install a new radiator seal sub-assembly with the 2 clips.





(d) Install the 6 clips.

7. INSTALL FRONT HOOD PROTECTOR

(a) Engage the 4 claws and install the front hood protector.





8. INSPECT FRONT WASHER NOZZLE SUB-ASSEMBLY Testing and Inspection