Removal

2GR-FE ENGINE CONTROL SYSTEM: HEATED OXYGEN SENSOR: REMOVAL

1. REMOVE ENGINE UNDER COVER ASSEMBLY Removal

2. REMOVE NO. 1 ENGINE UNDER COVER Removal

3. REMOVE NO. 2 ENGINE UNDER COVER Removal

4. REMOVE FRONT FLOOR COVER LH

(a) Remove the 3 clamps, 6 bolts and front floor cover LH.





5. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY (for 4WD) Removal

6. REMOVE TAIL EXHAUST PIPE ASSEMBLY Removal

7. REMOVE CENTER EXHAUST PIPE ASSEMBLY Removal

8. REMOVE FRONT NO. 3 EXHAUST PIPE SUB-ASSEMBLY Removal

9. REMOVE FRONT EXHAUST PIPE ASSEMBLY Removal

10. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

(a) Using SST, remove the heated oxygen sensor from the front No. 3 exhaust pipe sub-assembly.





SST : 09224-00010

11. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

(a) Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.





SST : 09224-00010