How To Proceed With Troubleshooting

SEAT BELT: SEAT BELT WARNING SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HINT
* Use the following procedure to troubleshoot the seat belt warning system.
* *: Use Techstream.
1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. INSPECT BATTERY VOLTAGE

Standard voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

NEXT -- Continue to next step.

3. CHECK CAN COMMUNICATION SYSTEM*

(a) Use Techstream to check if the CAN Communication System is functioning normally.

Result:





B -- GO TO CAN COMMUNICATION SYSTEM CAN Communication System
A -- Continue to next step.

4. PROBLEM SYMPTOMS TABLE

HINT
Problem Symptoms Table

NEXT -- Continue to next step.

5. OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) DATA LIST / ACTIVE TEST Scan Tool Testing and Procedures.

(b) Terminals of ECU Pinout Values and Diagnostic Parameters.

(c) On-vehicle Inspection Component Tests and General Diagnostics.

NEXT -- Continue to next step.

6. REPAIR OR REPLACE

NEXT -- Continue to next step.

7. CONFIRMATION TEST

NEXT -- END