Installation

AUDIO / VISUAL: STEERING PAD SWITCH: INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Multi-information Display)

(a) Engage the 2 pins to install the steering pad switch.





(b) Install the screw.

Torque : 2.4 Nm (24 kgf-cm, 21 in-lbf)

(c) Engage the 2 pins to install the steering pad switch assembly.





(d) Install the screw.

Torque : 2.4 Nm (24 kgf-cm, 21 in-lbf)

(e) Connect the steering pad switch connector to the spiral cable.

2. INSTALL STEERING PAD SWITCH LH (w/o Multi-information Display)

(a) Engage the 2 pins to install the steering pad switch LH.





(b) Install the screw.

Torque : 2.4 Nm (24 kgf-cm, 21 in-lbf)

(c) Connect the steering pad switch connector to the spiral cable.

3. INSTALL STEERING PAD Installation

4. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

5. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization

7. INSPECT STEERING PAD Installation

8. INSPECT SRS WARNING LIGHT

Diagnosis System