Installation

LIGHTING: HEADLIGHT DIMMER SWITCH: INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

(a) Engage the claw while loosening the clamp as shown in the illustration.





(b) Engage the clamp and install the headlight dimmer switch assembly as shown in the illustration.





(c) Connect the connector.

2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY Installation

3. INSTALL SPIRAL CABLE WITH STEERING ANGLE SENSOR Installation

4. INSTALL STEERING COLUMN COVER Installation

5. POSITION FRONT WHEELS STRAIGHT AHEAD

6. ADJUST SPIRAL CABLE SUB-ASSEMBLY Installation

7. INSTALL STEERING WHEEL ASSEMBLY Installation

8. INSPECT STEERING WHEEL CENTER POINT

9. INSTALL STEERING PAD Installation

10. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

11. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization

13. INSPECT STEERING PAD Installation

14. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.